Application
Insulators for Energy Storage Systems - High-Performance Insulation Solutions
Application Direction：Energy Storage EquipmentFLYAFORD
Because the energy required by people has a strong time and space, in order to rationally use energy and improve the utilization rate of energy, it is necessary to use a device to collect and store the excess energy temporarily unused for a period of time in some way, and then extract and use it at the peak of use, or transport it to the place where energy is scarce.
The basic task of energy storage systems is to overcome temporal or local differences between energy supply and demand. There are two situations in which this difference occurs. One is caused by sudden changes in energy demand, that is, there is a problem of peak load. The energy storage method can play a role in regulating or buffering when the load change rate increases. Since the investment cost of an energy storage system is relatively lower than that of building a peak-load plant, although the energy storage device will have storage losses, it can still reduce fuel costs because the stored energy is from the factory's excess energy or new energy. The other is caused by reasons such as primary energy and energy conversion devices, and the task of the energy storage system (device) is to make the energy output balanced, that is, not only to reduce the peak of energy output, but also to fill the trough of the output (that is, fill the valley).
Insulators install the energy storage device on the battery module. Secure and insulate wires to prevent current leakage and short circuits.